Set Up Instructions of Pak-o-Bird

1.  Open the carrier, match the snap buttons and attach the roof support panels

2.  For medium or larger size ONLY, attach the roof suport bar to the panels

3.  Zip up the side walls to the base. Attach the velcro® flap at the corner (3a)

4.  Zip up the front wall to the base. Attach the velcro® strip and flap at the corner

5.  To keep the front completely open, roll it up togather with the mesh window and attach it to a velcro® strip on top.

6.  To keep the mesh front window open, match and attach the end velcro® strip to one half way on the back of the front cover gently.

7.  Roll and keep the side curtains up by hooking the clasps to D-rings on top.

8.   Attach the front or backpack straps by attaching the clasps to the triangular rings in the back (to two middle rings for backpack or two outter rings for front carrying)

9.  Attach the front extension straps to the D-rings in the front. Adjust the extension strap and keep the carrier leveled to the ground

10.  Attach the plastic buckles at the other end of the strap to those on the carrier

11.  Attach the shoulder strap to the big buckles on each side of the carrier

12.  The carrier is set up. Detach the velcro® covers and expose the appropriate holes for attaching the perch, feed cups and water bottle accordingly. For medium and larger size, also attach the base support bar to the lowest perch hole.